Are you stuck on the Insignia Fire TV loading screen? Has it been frozen on the loading screen for several hours now? Or just doesn’t let you pass and stuck at the Insignia Fire TV loading logo?
Well, Before you throw your Fire TV Stick remote through a wall or shatter the screen, there is hope!
Do not worry and you won’t need to use either once I provide you with the tried and true methods to fix this problem.
The Fire TV is actually an amazing streaming device. Unfortunately, it has a few bugs that can really get in the way of your experience.
The Insignia Fire TV is known to freeze up and get stuck on the logo without going anywhere.
If you have faced this problem and the TV is stuck at “Insignia Fire TV Edition”, then here, in this guide, I will explain why this happens and how to fix it.
Since the Insignia Fire TV came with Amazon’s own software instead of the stock Android software found on many smart TVs, it was an instant hit – especially since Amazon Prime was also included.
After I faced the issue myself, I browsed through multiple forums, discussions, and even made contact with the official support, and I was relieved to discover that I was not the only one facing this issue and that many others also were.
If your TV is Stuck on Insignia Fire TV Edition logo, then it can be fixed by doing a soft reset of the TV. To do this, remove the TV power cable from the power socket and plug it back in after 3-5 minutes to clear the temporary software glitch that is causing it.
Why is the Insignia Fire TV stuck on logo Screen and won’t pass it?
There are several reasons for a frozen loading screen. By learning what is causing it, you can save yourself both time and frustration.
Even though I’ve encountered a stuck Insignia Fire TV logo while booting up, I discovered that it occurs in multiple situations.
You might encounter this issue while booting up your Insignia Fire TV, playing a video, changing settings, or opening up a menu.
What To Do And How To Fix Stuck Insignia Fire TV Logo?
Standing in front of your television and watching the Insignia Fire TV logo do nothing is not the best way to start off your day.
The Insignia Fire TV could pause on the loading screen for reasons like a TV system fault, power supply issue, booting up issue, buggy update, etc.
Hardware failures are the least common and it usually occurs because of a software conflict that can easily be resolved.
However, don’t stress out, here’s a step-by-step guide that will help you to get this solved.
- Wait and let it load
- Restart TV
- Reset Fire TV software
- Hard Reset your Insignia Fire TV
- Repair power supply
Allow it to load completely
It is possible for your Insignia Fire TV to take a long time to boot up.
According to Amazon, you should probably let it sit on the loading screen for 25 to 30 minutes.
When the bootup process takes this long, it’s likely due to troubleshooting or a fix that needs to be made to an internal problem, like an update.
The more you restart your TV, the less time it has to complete its tasks and boot up.
Therefore, it might be possible that your Insignia TV is troubleshooting any software or internal settings issue, so first waiting for some time might resolve the issue.
If it is not a major issue, The problem can be easily rectified by turning your Fire TV on and off.
When your TV gets stuck on the loading screen, usually it’s just glitching.
Try restarting your Fire TV with the dedicated power button. If it doesn’t work, you can unplug the power supply and reconnect it.
Reset Fire TV software
It is possible that the problem is caused by a bug or error in the Amazon Fire TV software since Insignia includes a built-in Amazon Fire TV.
You can restore the Amazon Fire TV software by following these steps:
- Press the Right and Back buttons at the same time on your Insignia Fire TV remote.
- Make sure you hold them for 10 seconds.
- Now you will see reset instructions on your screen.
- Follow them to perform the reset.
However, if the issue persists after the software update and soft reset, then try the hard reset.
Hard Reset your Insignia Fire TV
Often, turning off your Insignia Fire TV isn’t enough to eliminate all of its electrical power.
It is possible for small packages of power to disrupt the reset process.
This situation requires you to perform a hard reset on your Insignia Fire TV.
- Remove the power cord from your Insignia Fire TV.
- Keep the dedicated power button pressed for 30 seconds to 2 minutes.
- Hold the power button while plugging in the TV.
- Release the power button once you see the loading screen.
As these steps will restore settings to factory default, the remote will also be disconnected.
So after you have completed these steps, you must resync your Fire TV remote by pressing and holding the home button for 30 seconds.
Repair power supply
Finally, Insignia Fire TVs can take a long time to load if they don’t receive enough electrical power.
In this case, the TV’s power supply is broken and not functioning properly.
Make sure that the power cables are properly connected to the electrical outlet. Loose connections can cause the current to leak, weakening the signal.
Therefore, it is best to keep it in check regularly.
If you find any damage along the power cable, you should replace it immediately.
Wrapping It Up
When the Insignia Fire TV does not behave in the way you expect, it can be quite frustrating. This is especially true when we don’t know why it is happening and there is no error code or issue caused on-screen.
Hopefully, this guide will help you fix the problem of the Insignia Fire Tv stuck on loading.
If you face any issue while following the above steps you can let me know, but If you are still having trouble even after following the above steps, you should contact Insignia customer support.